Comments on: Flip-Top Cabinet http://shootingboard.net My little contribution to the world wide web of woodworking Tue, 17 Jan 2012 23:43:22 +0000 hourly 1 http://wordpress.org/?v=abc By: Monty http://shootingboard.net/shop/flip-top/comment-page-1/#comment-330 Monty Sat, 21 Nov 2009 12:13:10 +0000 http://shootingboard.net/shop/flip-top/#comment-330 The top is stabilized by a pair of 1/4" lynch pins at each end. I just held the top level and drilled right through the sides and into the top piece. You can see the hole for the lynch pin in <a href="http://shootingboard.net/images/shop/fliptop/IMG_0905.jpg" target="_blank" rel="nofollow">this photo</a>. Hope that helps. The top is stabilized by a pair of 1/4″ lynch pins at each end. I just held the top level and drilled right through the sides and into the top piece. You can see the hole for the lynch pin in this photo. Hope that helps.

]]> By: Ray Ashinhursr http://shootingboard.net/shop/flip-top/comment-page-1/#comment-326 Ray Ashinhursr Thu, 12 Nov 2009 06:21:54 +0000 http://shootingboard.net/shop/flip-top/#comment-326 I am interested in your flip top cabinet if you wish to share any drawings or information on how you stabilized the top after you rotated it would be appreciated.I also have been looking at building the same work bench your craftsmanship can be seen in your photos. Iam a Texas resident so I cannot see the details on the website. Thanks Ray I am interested in your flip top cabinet if you wish to share any drawings or information on how you stabilized the top after you rotated it would be appreciated.I also have been looking at building the same work bench your craftsmanship can be seen in your photos. Iam a Texas resident so I cannot see the details on the website.

Thanks

Ray

]]> By: Paul Frederick http://shootingboard.net/shop/flip-top/comment-page-1/#comment-294 Paul Frederick Thu, 07 May 2009 09:27:23 +0000 http://shootingboard.net/shop/flip-top/#comment-294 When I saw the infeed platform you made for your thickness planer I thought of the auxiliary feed table I made for my thickness planer. I have a Dewalt and it has issues going below 3/4 of an inch high, so I made a table that slips into the machine, with a hook underneath (two scraps of wood), so I never had to worry about that. My table also doubles as both an infeed, and outfeed table too. As an added bonus my machine looks like I've never run a piece through it. I have to admit though whenever I use that machine it is a bear to pick up. Not my auxiliary table, the machine itself. When I saw the infeed platform you made for your thickness planer I thought of the auxiliary feed table I made for my thickness planer. I have a Dewalt and it has issues going below 3/4 of an inch high, so I made a table that slips into the machine, with a hook underneath (two scraps of wood), so I never had to worry about that. My table also doubles as both an infeed, and outfeed table too. As an added bonus my machine looks like I’ve never run a piece through it.

I have to admit though whenever I use that machine it is a bear to pick up. Not my auxiliary table, the machine itself.

]]>